Click image to view full size image
liquid chain extender with low toxicity environmental protection type dimethyl thio-toluene diamine (DMTDA) with high performance
1.Data Sheet of the High performance DMTDA Ethacure 300 curative
English name：Dimethylthiotoluenediamine (DMTDA)
Nickname：Ethacure 300
CAS NO：106264-79-3
EINECS NO：403-240-8
UN NO：3082
Transport hazard class (es)：9
Packing group, if applicable：III
Similar products:U.S AIbemarle (Ethacure 300)
2.Physical and chemical properties of the SPUA and Adhesives curing agent E300
Property |
Result |
Molecular formula |
C9H14N2S2 |
Structural formula |
|
Molecular weight |
214.34 |
Initial boiling point |
200°C (1.68 mmHg) |
Refractive index |
1.659 |
Melting point/ freezing point |
4°C |
Flash point |
163.4°C |
Vapour pressure (kPa) |
＜0.0001 |
Relative density g/cm3 at 25 °C |
1.206 |
Viscosity（20°C) |
690 |
Vapour pressure |
mmHg ≤ 0.01 (20°C) |
3.Standard value of the Curing agent for epoxy/polyurethane resin DMTDA(E300)：
Property |
Result |
Appearance |
Light yellow liquid |
Dimethylthiotoluenediamine |
≥ 95% (Q/370781YXHG002-2015) |
Methylthiotoluenediamine |
≤ 4.0% |
Trimethylthiotoluenediamine |
≤ 1.0% |
Water content |
≤ 0.1% |
Amine value (mg KOH/g) |
525-535 |
4.Uses and applications of the new type liquid diamine curing crosslinking agent for polyurethane:
DMTDA is a new type of polyurethane elastomer curing crosslinking agent, equivalent to Ethancure-300. Mainly includes two kinds of isomers, 2,4-isomer and 2,6-isomer ( The ratio is about 77~80% / 17~20%), compared with MOCA, it is low viscosity liquid under normal temperature, can be used in low temperature.
DMTDA is a low toxicity and environmental protection type liquid diamine chain extender, mainly used for polyurethane elastomer, RIM (reaction injection molding), SPUA (spray polyurea elastomer) and the adhesives. At the same time, it may be used as curing agent for epoxy resin, it has been widely used in polyurethane rollers, medical science, stamping and so on. In addition, it has a wide range of applications in the automobile, construction, mining, metal mining, textile, papermaking, printing. The curing speed of DMTDA is much slower than that of DETDA, which can be mixed with DETDA in different proportions, to adjust the curing speed to meet different requirements.
5.Packaging and transport
Packaging for 1000KG/IBC barrels, or ISOTANK, the special packaging in accordance with the requirements of customers.
6.Storage
Stacked in a cool/ dry/ ventilated place, keep away from heat/ fire, to prevent the direct sunlight, to avoid high temperature, do not sharp object collision damage.
http://www.annewmaterial.com/